какая творческая карта лучше для создания аудио/midi

У меня есть немного вопроса. Мой друг делает музыку с ableton живыми 8.1 и причиной 5. Во-первых, у него был Творческий Audigy 2 (с midi gameport) внутренняя карта. Я заменил, он - карта для Творческой Музыки адская карта с передним отсеком (X-Fi), потому что я думал, что можно было бы быть лучше.

Теперь он думает, что Audigy 2 был лучшей картой.

кто-то может сказать мне, если это верно согласно спецификациям?

Какая творческая карта лучше для создания аудио/midi?

спецификации для XtremeMusic

Technical Specifications 

■24-bit Analog-to-Digital conversion of analog inputs at 96kHz sample rate
■24-bit Digital-to-Analog conversion of digital sources at 96kHz to analog 7.1 speaker output
■24-bit Digital-to-Analog conversion of stereo digital sources at 192kHz to stereo output
■16-bit to 24-bit recording sampling rates: 8, 11.025, 16, 22.05, 24, 32, 44.1, 48 and 96kHz
■ASIO 2.0 support with direct monitoring at 16 and 24-bit at sample rates of 44.1/48/88.22 and 96kHz
■Enhanced SoundFont support at up to 24-bit resolution
Audio Performance (Rated Output @ 2Vrms, Typical Value)

■Signal-to-Noise Ratio (20kHz Low-pass filter, A-Weighted) 
◦Stereo Output 109dB
◦Front and Rear Channels 109dB
◦Center, Subwoofer and Side Channels 109dB
■Total Harmonic Distortion + Noise at 1kHz (20kHz Low-pass filter) = 0.004%
■Frequency Response (+/-3dB, 24-bit/96kHz input) = <10Hz to 46kHz
■Frequency Response (Stereo only) (+/-3dB, 24-bit/192kHz input) = <10Hz to 88kHz
Connectivity

■FlexiJack (Digital In / Digital Out / Line In / Microphone) via 3.50 mm minijack
■Line level out (Front / Rear / Center / Subwoofer / Rear Center) via 3.50 mm minijacks
■AUX_IN line-level analog input via 4-pin Molex connector on card
■One External AD_Link (26 pin) connector for linking to the X-Fi I/O Console (upgrade option)
■One Internal AD_Ext connector for linking to the X-Fi I/O Drive (upgrade option)

Спецификации для Audigy 2

Audio Performance 

Signal-to-Noise Ratio with AES17 filter (A-Weighted) 
  2V Rated Output  1V Rated Output  
Stereo Output 106dB 102dB 
Front and Rear Channels 106dB 102dB 
Center, Subwoofer and Rear Center ~90dB ~86dB 

Total Harmonic Distortion + Noise at 1kHz (A-Weighted) = 0.004% (1V, 2V Rated Output) 
Frequency Response (+/-3dB, 24-bit/96kHz input ) = <10Hz to 46kHz (1V, 2V Rated Output) 
High Definition Audio Quality for Playback and Recording 
24-bit Digital-to-Analog conversion during playback with sampling rates of 8, 11.025, 16, 22.05, 24, 32, 44.1, 48 and 96kHz in 5.1 mode and up to 192kHz in stereo mode 
24-bit Analog to Digital conversion during recording in 8, 16 or 24-bit at sampling rates of 8, 11.025, 16, 22.05, 24, 32, 44.1, 48 and 96kHz 
SPDIF (Sony/Philips Digital Interface) input at up to 24-bit/ 96kHz quality 
SPDIF output up to 24-bit at 48 or 96kHz 
ASIO drivers for low latency (=2ms) multi-track playback and recording at 16-bit/48kHz) 
Wave-Table Synthesis and Midi Features 
Creative Hardware synthesizer (2x16 Channels) with 64-voice polyphony featuring E-MU®'s patented 8-point interpolation technology for accurate sample reproduction 
Creative Software synthesizer - multi timbral wave-table (16 Channels) 
SB1394™ Connectivity 
IEEE® 1394 / FireWire® / i-Link® compatible interface with up to 400Mbps transfer rate 
Sound Blaster Audigy 2 On-Board Connectors 
Line level out (Front / Rear / Center / Subwoofer /Rear Center) 
Digital Out for 5.1 support (6-channel SPDIF Output) 
Line in 
Microphone in 
SB1394™/ FireWire® port 
Telephone Answering Device in 
Analog / Digital CD Audio in 
15-pin MIDI / Joystick port extension header 
Internal SB1394 header to Sound Blaster Audigy 2 Internal Drive (Upgrade Option) 
AD_EXT extension header to th